




Hook Strip Manufacturer & Supplier for Vibrating Screen Frames
A hook-edge vibrating screen installation requires more than a correctly manufactured mesh panel. The screen frame must also have a compatible fitting that allows the formed mesh edges to engage securely and maintain the required tension. This is where a Hook Strip plays an important role.
HMB Engineering manufactures and supplies Hook Strips for vibrating screen frame installations. A hook strip is a steel bar with a formed hook profile, fitted to the screen frame rail by welding or bolting. It provides the engagement surface for the pre-formed hook edges of compatible vibrating screen cloth.
Unlike removable screen clamps, a hook strip is a permanent part of the screen frame assembly. Its profile and positioning must match the hook configuration of the mesh panel to achieve proper engagement and support correct screen tension.
Request a Quote for Hook Strips
Planning a new vibrating screen frame or replacing an existing hook strip?
Share your screen frame dimensions, mesh hook configuration and preferred mounting method with HMB Engineering to discuss a suitable hook strip for your installation.
HMB Engineering supplies hook strips in standard profiles and lengths matched to its Hook Edge Vibrating Screen Cloth range, helping customers coordinate the mesh and frame fitting requirements.
What Is a Hook Strip and How Does It Work?
A Hook Strip is a formed steel bar installed along the screen frame rail. Its shaped profile creates a receiving edge onto which the pre-formed hooks of a vibrating screen mesh panel are engaged.
During installation, the hook edge of the screen cloth fits onto the corresponding hook strip. Once correctly positioned and tensioned, the connection helps hold the mesh panel securely against the screen frame.
The hook strip therefore performs two important functions:
Because the hook strip remains attached to the screen frame, its dimensions, profile and mounting arrangement should be considered during screen frame fabrication or modification.
Weld-On vs Bolt-On Hook Strip: Choosing the Mounting Method
The hook strip can be attached to a vibrating screen frame using different mounting arrangements. The appropriate method depends on the frame design and fabrication requirements.
Weld-On Hook Strip
Bolt-On Hook Strip
The selection should be based on the screen frame construction, installation method and required hook strip dimensions.
Why Hook Strip and Hook Edge Screen Cloth Compatibility Matters
A hook strip and screen cloth should be treated as matching components of the same installation system. Even if both parts have a hook-shaped profile, differences in geometry or dimensions can affect how securely they engage.
Before selecting a hook strip, consider the following:
Hook Profile: The strip geometry should match the pre-formed hook edge of the mesh panel.
Frame Rail Position: The strip must be positioned correctly along the supporting frame rail.
Mounting Method: Confirm whether the frame requires a welded plain bar or a bolt-on strip with pre-drilled holes.
Required Length: Check the frame width and determine the appropriate strip length.
Mesh Tensioning Arrangement: Confirm that the installation allows the screen cloth to be fitted and tensioned correctly.
For replacement work, sharing a photograph or sample of the existing hook strip and screen cloth edge can help establish the required profile.
Hook Strip and Hook Edge Screen Cloth: How They Work Together
A hook strip provides the frame-side engagement point, while hook-edge screen cloth provides the formed mesh-side fitting. Both components must be compatible for the installation to work correctly.
HMB Engineering supplies Vibrating Screen Cloth with Hook Edge for industrial screening installations requiring a formed hook-edge arrangement.
The mesh panels are available in spring steel, high carbon steel and stainless steel, depending on application requirements. Mesh opening, wire diameter, panel dimensions and hook configuration can be discussed according to the equipment and screening needs.
Related Screen Fittings and Accessories
Apart from hook strips, other screen installation components may be required depending on the equipment's fastening and tensioning arrangement.
Hook Strip Manufacturer and Supplier – HMB Engineering
HMB Engineering manufactures and supplies Hook Strips for vibrating screen frame preparation and hook-edge mesh installation. The product range includes standard profiles and lengths matched to its hook-edge screen cloth range.
Whether you are fabricating a new vibrating screen frame, modifying an existing deck or replacing a worn hook strip, sharing the frame dimensions and required mounting method can help identify a suitable option.
For product specifications, availability and pricing, contact HMB Engineering with your screen frame and mesh details.
Hook strips are used wherever vibrating screen frames are designed to accommodate hook-edge mesh panels. Their main applications include:
A hook strip is a formed steel bar attached to the screen frame rail. It provides the engagement surface for the pre-formed hook edges of compatible vibrating screen cloth.
It can be attached by welding or bolting. HMB Engineering supplies plain bars for weld-on installation and options with pre-drilled holes for bolt-on mounting.
A hook strip is the frame-mounted steel component, while hook-edge screen cloth is the mesh panel with pre-formed hooks. The two components engage with each other during installation.
HMB Engineering supplies standard profiles and lengths matched to its hook-edge vibrating screen cloth range. Standard lengths can be cut to the required frame width on-site.
Check the mesh hook profile, screen frame rail dimensions, mounting method and required length. Providing a photograph or drawing of the existing arrangement can help identify the suitable profile.